MC227 1-Way Heating Controller

Select Country

To continue: Please select the country where you are delivering to.

MC227 1-Way Heating Controller / MC227

The MC227 1-Way Heating Controller operates up 2300W and can control one piece of laboratory equipment at a time, or an equivalent load, i.e. for a CMUV22/L which has 3 elements, you can have an MC227 on each element. The MC227 Heating Controller has been designed to control the heating of resistive loads for bench top operation and is suitable for EM series Electromantles, the Electric Bunsen and Heating Cords and Tapes.

It  has 2 neon indicators: "Power On" white neon light and "Mantle/Bunsen Heater On" amber neon light, with a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the heating controller's amber neon light will pulsate to show that power is being supplied to the equipment being controlled, e.g. mantles, heating tape or cord. The pulse frequency will decrease as the regulator control knob setting is increased, and at maximum setting, the amber neon will be continually illuminated.

A rod support clamp is provided at the rear of the MC227 heating controller to take a standard 12.5mm (1/2") diameter rod, but is can also be wall-mounted or stand directly on the bench. It has a short mains lead with an IEC socket to connect it to the resistive load. An accessory extension mains lead is available where remote operation is required, e.g. in a fume extraction hood.

Warranty: One year parts and labour
Certification: CE

Quantity Spin UpSpin Down

MC227 1-Way Heating Controller

Full product specification.move

Full product specification.

1-Way Heating Controller Part Code



Single place percentage On/Off die-cast

Electrical requirements: 230V

230V, 50/ 60 Hz, 2300W

Electrical requirements: 115V

Not applicable

Controller power consumption


Electrical requirements

230V, 50-60Hz, 2300W

Dimensions (d x w x h), mm

115 x 120 x 80

Weight, kg